Tuesday May 22
Move
Display 0 | 5 | 10 | 15 Stories

News

Topics
Top Story

Chassis weight 25gr 747

Chassis weight 25gr 747

For Serpent 747, purpose made brass slide- weights which can be mounted into the slots pre-made in the 747 chassis. These weigh 25 grams each and maximum 3 can be fitted. Black coated, laser engraved,...

New Serpent PitTowel

New Serpent PitTowel

Serpent has released this new large pit towel in orange/yellow colours. 

PROTOform FlexFit Hat

PROTOform is blending old school baseball cap styling with new school hat materials for a brand new black fitted hat. The full size PF logo front and center stands out among the crowd. The back of the...

New RX8 Brass 1-Piece Engine Mount

• optional brass engine mount for RX8 • centralizes 60g weight below engine • increases traction • improves in-corner rotation • solid engine mounting & easy adjustment • CNC-machined...

Orion CRF engine production video

Have a look into the production of the World Championship winning Team Orion CRF engines with Team Orion's chief designer Adrien Bertin. 

New RX8 Alu Adjustable Servo Saver

Serpent 1/10 rear extra bodysupport

2012 Readers’ Choice Awards – Winners

New Xceed 2012 bodyshells

V8 front flex radio plate system

New RX8 XCA Clutch Set - Reverse

New Mugen Seiki Carrying Bag

Xceed new blend RC Racing Fuel

H-K1 4mm Shorter Wheel Base Conv Set

3hobby.net Forums are no more!



EFRA clarifies 1/10th IC weight limit and other rules.

Attention: open in a new window. PDFPrintE-mail

YeahRacingTxCaseEFRA 1/10th IC chairman Franky Noens has written to clarify the rules that were proposed and approved at the recent AGM which are hotly debated at various forums currently. The hotest topic among these is the new weight limit for the 1/10th IC class being 1550 grams effective 2013. Click on "Read more..." or the EFRA logo to read the full letter.

 

 

Dear Friends,

It seems the right moment to enlighten a few subjects, that perhaps are not clearly understood after the AGM.

Probably I did not communicate them clearly enough, and I would like to apologise for that. The last few weeks I did not have the opportunity to answer to every individual mail.

The new rule regarding the minimum weight of 1550 gr. will take effect on 01/01/2013. This is a technical rule and according to the Article technical rule changes, Chapter 6 page 51 in the EFRA handbook, such changes will take effect 12 months after voting. In the future, to avoid such un clarities, we will add in the minutes of the meeting, to each accepted proposal the year when they start to take effect. Regarding this subject of weight, we have created a lot of commotion with manufacturers, who did not have any comment before the rule was accepted. Now they fear that due to the low weight, cars will be a lot more expensive, and more breakable due to the more “exotic” materials they will have to use to loose weight.

And then we have tire treatment, with all the wildest stories around that subject. The emphasis of this rule is that on EC’s the organisers are obliged to treat their track in such a way, that there is a lot of grip during the entire event. That way, treatment of tires will be unnecessary. I believe that the rest of the rule is pretty clear, before the start of your finale or heat, your tires will be checked with an electronic sniffer, if the sniffer reacts you can not drive with those tires.

Regarding the World Championship in Thailand, 1725 gr is the minimum weight and no, this will not change for this W.C.

At this moment postal votes are held inside IFMAR about the following:
- The World Championship will be run over a period of eleven (11) nine (9) days, including a Spare Day.
- No practice on the event track will be allowed in that specific W.C. class during the two (2) six (6) weeks preceding frequency controlled practice
- Bodies will have to be made from polycarbonate with a minimum thickness of 0.75mm.
- Foam and/or rubber tyres may be used. Any materials used in, or on, the tyres must not damage the racing surface. Treatment of the tyres with additives is prohibited allowed as long as the products used are not volatile and toxic. Tires will be checked at the entrance of the pitlane with equipment from RAE or similar to detect volatile and/or toxic products. Tires must pass the testing equipment in the controlled pit area. When you are checked with a positive result of the equipment the tires are confiscated by IFMAR and you are allowed to put new tires on your car. The start will not be delayed due to such an event. The organizer must make all efforts to bring the track surface at a good grip level.

- The fuel brand will be decided after the preworlds.

The results of the postal votes will be known mid of February, I will keep you updated on those rules that might change in IFMAR.

Also I want to let you know that there still are places left for both 1/10th EC’s. if you still want to participate, please contact your federation.

Yours sincerely,

Franky Noens

EFRA Chairman 1/10th IC Track

Written by :
SlowAndSteady
 

Latest RacerBlogs

1/10 Nitro on road shops in London
Monday, 19 March 2012
I'm fr Malaysia, goin to London this weekend. Anybody can help me to list few good stores(cheap and varieties) for me... Read more...
hyper one 1/7th spoiler
Sunday, 18 December 2011
hello there im after a spoiler to fit my hyper one 1/7th ferrie just like the one steve gettings has on his hyper one... Read more...
What puts you off?
Sunday, 29 May 2011
Just thumping a blog to test and also ask you racers the question - what puts you off from racing whether it is at club... Read more...
RC-Junkies track days.
Friday, 20 May 2011
RC-Junkies is an internet community formed by many hobby level drivers. Beside a forum where people can talk with each... Read more...
Image
RC and video arcade mashup
Sunday, 02 January 2011
I was just a bit bored today and surfing a bit when I found this old but interesting article because it reminded me old... Read more...